Type

Gestra Thermostatic Steam Trap BK 212 ANSI 2500

Fitur

• Forged alloy steel body with Titanium body shield to resist
flashing damage.
• Titanium alloy valve and seat.
• Pressure assisted “fail open-only” design.
• Standard factory setting discharges hot condensate in a
modulating fashion at approximately 18°F (10°C) below
saturation temperatures throughout its operating range.
• One internal bimetallic regulator for all applicable body
pressure ranges.
• Staged “control valve” style nozzle reduces wiredrawing
damage by reducing flashing. Totally unaffected by water
hammer.
• Self draining – will not freeze when installed in gravity
drainage position. Can be installed in any position.
• Automatically vents air and non-condensable gases and has
a very high (>9:1) cold water capacity for rapid start-up.
• Operates with zero steam loss throughout its operating
range saving steam and money during the life of the trap.
• Easy in-line inspection and maintenance – no need to
remove the trap from the piping to clean or replace the
internals.
• Valve and seat are a single, modular replacement part.
• Internal stainless steel strainer.
• Integral check valve design.
• Two (2) year guarantee

Popular Tags :

Gestra Thermostatic Steam Trap BK 212 ANSI 2500 | Aquametro | Ari Armaturen | Asahi | Badger Meter | Beru | Condor | Danfoss |