Description

BERU ZE 14-12-600 A1 ignition electrode M14x1.25x12,; Sebuah elektroda pengapian khusus dengan satu elektroda.

Type

BERU ZE 14-12-600 A1

Fitur

Description

Ignition Electrode BERU ZE 18-12-600 A1 dirancang untuk sistem pengapian yang handal dan efisien.

Type

ZE 18-12-600 A1

Fitur

-

Description

Distributor BERU Ignition electrode ZE 14-8-400 A1, M14x1,25x8;Special ignition electrode with single electrode

Type

BERU Ignition electrode ZE 14-8-400 A1

Fitur

-

Description

Dungs Pressure Switch GW 50 A5 adalah sakelar tekanan kompak sesuai EN 1854 untuk beberapa aktuator DUNGS. Sakelar tekanan cocok untuk menghidupkan, mematikan, atau mematikan sirkuit pada perubahan tekanan aktual relatif terhadap titik sakelar yang disetel (nilai referensi).

Type

Dungs Pressure Switch GW 50 A5

Fitur

-

Description

SQN 31.401 Aktuator elektromotorik untuk digunakan dengan peredam udara dan katup kontrol pembakar minyak atau gas berkapasitas kecil hingga sedang.

Type

SQN 30.102A2700
SQN 30.111A2700
SQN 30.111A1700
SQN 30.111A3500
SQN 30.121A2700
SQN 30.121A1700
SQN 30.121A3500
SQN 30.131A2700
SQN 30.131A1700
SQN 30.151A2700

Fitur

Aktuator SQN3... / SQN4... dirancang untuk menggerakkan peredam gas dan udara pada
pembakar minyak atau gas berkapasitas sedang atau untuk kontrol bahan bakar yang bergantung pada beban dan
volume udara pembakaran:
- Sehubungan dengan pengontrol P-PI atau PID, seperti RWF...
- Langsung melalui berbagai jenis kontrol burner, seperti LOA..., LMO..., LMG... atau
LFL...
- Sehubungan dengan kontrol 1- atau 2-kawat atau pengontrol 3-posisi
 Semua jenis aktuator
dengan:
- Rumah plastik tahan benturan dan tahan panas
- Terminal sekrup untuk sambungan listrik
- Kereta gigi bebas perawatan, yang dapat dilepas
- Indikasi posisi internal dan eksternal
- Sakelar ujung dan tambahan yang mudah disesuaikan untuk mengatur titik sakelar
 Memegang torsi: - SQN3...
- SQN4...
0.8...3 Nm
6 Nm
 Waktu berjalan: - SQN3...
- SQN4...
4,5...30 detik
120 detik
 Arah putaran : - SQN30...
- SQN31... / SQN41...
berlawanan arah jarum jam
searah jarum jam

Description

Siemens LFL 1.333 LFL 1322, Kontrol burner Untuk burner draft paksa berbahan bakar gas, minyak, atau bahan bakar ganda dengan kapasitas sedang hingga tinggi Untuk burner multitahap atau modulasi dalam operasi intermiten Dengan kontrol peredam udara yang diperiksa Pengawasan nyala api – dengan detektor UV QRA2 / QRA4 / QRA10 – dan probe ionisasi LFL1... dan Lembar Data ini dimaksudkan untuk digunakan oleh OEM yang mengintegrasikan kontrol burner dalam produk mereka!

Type

Siemens Burner Control LFL 1333 LFL 1322

Fitur

 Kontrol dan pengawasan pembakar draft paksa dari percikan api langsung atau terputus
konstruksi percontohan
 Untuk kapasitas sedang hingga tinggi
 Untuk operasi intermiten (setidaknya satu shutdown terkontrol setiap 24 jam)
 Untuk penggunaan universal dengan pembakar multistage atau modulasi
 Untuk digunakan dengan pemanas udara stasioner (WLE)
 Untuk digunakan dengan pembakar bahan bakar ganda
 Tipe-diuji dan disetujui sesuai dengan DIN EN 298

Description

Sebagai distributor uv detector di surabaya . PT Indotama Niaga Teknik Menawarkan produk dari brand siemens yaitu Siemens UV Detector QRA5 QRA7, untuk memenuhi kebutuhan industri dan manufaktur

Type

Siemens UV Detector QRA5 QRA7

Fitur

-

Description

PT Indotama Niaga Teknik sebagai distributor danfoss di indonesia Menawarkan produk dari merk Danfoss yaitu Danfoss Electronic Oil Burner Control OBC 82 10 untuk memenuhi kebutuhan industri dan manufaktur

Type

Danfoss Electronic Oil Burner Control OBC 82 10

Fitur

• Untuk burner 2 tahap hingga 30 kg/jam
• Untuk pembakar dengan atau tanpa pemanas awal
• Pengaturan waktu yang tepat dan dapat direproduksi
• Batasan pada 3 restart oleh kegagalan api dalam
periode operasi yang sama
• Batasan 10 menit. pada waktu pemanasan awal
• Keluaran alarm jarak jauh
• Indikasi alasan penguncian
• Indikasi pemanasan awal dan pengoperasian

Description

Sebagai distributor brand danfos di surabaya. PT Indotama Niaga Teknik menawarkan produk dari brand danfoss yaitu Danfoss Ignition Units EBI4 Series untuki memenuhi kebutuhan industri dan manufaktur

Type

Danfoss Ignition Units EBI4 Series

Fitur

• 1- or 2-pole ignition• Low power consumption due to high efficiency (new technology)
• Complies with the RoHs and WEEE directives
• EMC according to EN 55014-1 and EN 55014-2
• Earth connection through the primary cable
• Same dimensions and flexible mounting as the well-known EBI series

Description

Sebagai distributor dungs di surabaya Indotama Niaga Teknik Menawarkan produk dari brand dungs yaitu Dungs FRN Zero Pressure Regulator DN 40 to DN 100 type FRN 515,FRN 520,FRN 5040,FRN 5050,FRN 5065,FRN 5080,FRN 5100

Type

FRN 515
FRN 520
FRN 5040
FRN 5050
FRN 5065
FRN 5080
FRN 5100

Fitur

-

Description

Indotama Niaga Teknik menawarkan produk dari suntec yaitu pompa oli suntec type AT3 gear size 45 55 65 (suntec oil pump type AT3 gear size 45 55 65), sebagai distributor spare part burner di surabaya kami menawarkan berbagai kebutuhan industri dan manufaktur

Type

AT3 gear size 45 55 65

Fitur

-

Description

Indotama Niaga Teknik menawarkan produk dari suntec yaitu pompa oli suntec type AN 77A 7255 (Suntec Oil Pump AN 77A 7255), sebagai distributor spar part burner di surabaya kami menawarkan berbagai kebutuhan industri dan manufaktur

Type

Suntec Oil Pump AN 77A 7255
Suntec Burner Pumps
Suntec Oil Pump AS47A
Suntec Oil Pump AS47C
Suntec Oil Pump D57A
Suntec Oil Pump D57C
Suntec Oil Pump E4NC 1069
Suntec Oil Pump E4NA 1069
Suntec Oil Pump AJ 6CC
Suntec Oil Pump AT2 47C
Suntec Oil Pump AL 65C
Suntec Oil Pump AL 65B
Suntec Oil Pump AS 67 C
Suntec Oil Pump AS 67 A
Suntec Oil Pump AN 77 A
Suntec Oil Pump AE 67 C
Suntec Oil Pump AE 97 E
Suntec Oil Pump AL 65 C
Suntec Oil Pump AL 95 C
Suntec Oil Pump J 6 CC
Suntec Oil Pump. E 6 NA
Suntec Oil Pump E 6 NC

 

Suntec 2 Stage Pumps

Suntec Oil Pump AT2 45A
Suntec Oil Pump AT2 45C
Suntec Oil Pump AT3 45A
Suntec Oil Pump AT3 45C

Fitur

-

Description

Dungs Pressure regulator FRU Circulation regulator DN 40 DN 100. Sebagai distributor spare part burner di Surabaya, Indotama Niaga Teknik menawarkan produk dari brand Dungs yaitu Pressure regulator FRU Circulation regulator DN 40 - DN 100. Dengan mengutamakan kualitas dan pelayanan, Indotama Niaga Teknik siap memenuhi kebutuhan sparepart di industri dan manufaktur.

Type

Dungs Pressure regulator FRU Circulation regulator DN 40 DN 100

Fitur

-

Description

Dungs FRNG Pressure Regulator DN 40 DN 50. Sebagai distributor sparepart burner di Surabaya. Indotama Niaga Teknik menyediakan produk dari brand Dungs yaitu Dungs FRNG Pressure Regulator DN 40 DN 50, untuk memenuhi kebutuhan industri dan manufaktur. Segera hubungi kami untuk mendapatkan penawaran dan harga terbaik dari kami.

Type

Dungs FRNG Pressure Regulator DN 40 DN 50

Fitur

-

Description

Dungs FRM Medium Pressure Regulator DN 65 DN 80. Indotama Niaga Teknik menawarkan produk dari brand Dungs yaitu FRM Medium Pressure Regulator DN 65 DN 80, sebagai distributor spare part burner di Indonesia, kami menawarkan produk dari merk Dungs untuk memenuhi kebutuhan spare part industri dan manufaktur. Anda bisa menghubungi kami untuk mendapatkan penawaran dan harga terbaik dari kami.

Type

FRM Medium Pressure Regulator DN 65 DN 80

Fitur

-

Description

Dungs FRM Medium Pressure Regulator DN 25 DN 50. Indotama Niaga Teknik menawarkan produk dari brand dungs yaitu FRM Medium Pressure Regulator DN 25, sebagai distributor sparepart burner di Surabaya, kami menawarkan produk dari brand dungs untuk memenuhi kebutuhan sparepart industri dan manufaktur. Anda dapat menghubungi kami untuk mendapatkan penawaran dan harga terbaik dari kami.

Type

FRM Medium Pressure Regulator DN 25 DN 50

Fitur

-

Description

Pompa oli SUNTEC TA dirancang khusus untuk aplikasi pemanas industri menggunakan minyak ringan atau berat. Dilengkapi dengan lokasi preheater untuk membuat dingin mulai lebih mudah.

Type

- OIL PUMP TYPE TA
GEAR SIZES 2
- OIL PUMP TYPE TA
GEAR SIZES 3
- OIL PUMP TYPE TA
GEAR SIZES 4
- OIL PUMP TYPE TA
GEAR SIZES 5

Fitur

-

Description

Pompa oli SUNTEC AE adalah model dasar yang menggabungkan tekanan katup pengatur. Itu tidak memiliki fitur pemutus, ini memungkinkan pembersihan udara melalui saluran nozel.

Type

- AE GEAR SIZES 47
- AE GEAR SIZES 57
- AE GEAR SIZES 67
- AE GEAR SIZES 77
- AE GEAR SIZES 97

Fitur

-

Description

-Distributor Dungs Pressure regulator, Pressure regulator - .The FRI/6 balancing type pressure regulator combines a pressure regulator and a 50 micron gas filter in one housing. Various combinations are possible using the FRI/6 with the most of the DMV shutoff valves for a compact modular system

Type

FRI 705/6 -FRI 707/6 
FRI 710/6 -FRI 712/6 

Fitur

-

Description

The FRG ratio regulator/zero governor has an adjustable setpoint spring and non adjustable counterspring. - Distributor dungs, distributor gas regulator valve -

Type

FRG 705/6 
FRG 707/6 
FRG 710/6 
FRG 712/6 
FRG 715/6
FRG 720/6
FRG 725/6 

Fitur

-

Description

Sparepart burner Distributor dungs - Distributor solenoid valve - .The DUNGS safety solenoid valve MV/4, MVD, MVD/5, MVDLE/5 is a single-stage automatic shut-off valve as per EN 161 for gas burners and gas appliance.

Type

MV/4, MV/5 Single-stage solenoid valve, normally when closed, fast opening, fast closing.

MVD/5 Single-stage solenoid valve, normally when closed, fast opening, fast closing, manual limitation of
flowing gas volume by adjusting main volume.

MVDLE/5 One-stage solenoid valve, normally when closed, slow opening, fast closing. Opening time adjustment with fast stroke range. Main volume adjustment.

Fitur

-

Description

Sparepart burner Italpump Gas Filters serves to prevent the passage of dust or dirt particles carried by the gas, protect regulatory devices and for safety. This gas filter has a large filtering component, can be removed for inspection and can be washed/cleaned. We have stocks product of Italpump Gas Filters with the following types.

Type

Gas Filter Italpump type IF
Gas Filter Italpump type IFR0
Gas Filter Italpump type IFR1-2
Gas Filter Italpump type IFR3-5

Fitur

   EC certified according to EN 126
    In conformity with the 2009/142/EC Directive (Gas Directive)
    In conformity with the 97/23/EC Directive (PED Directive)
    In conformity with the 94/9/EC Directive (ATEX Directive)

Description

Italpump Gas Pressure Regulators is a tool for adjusting the pressure of gas and air outlets using a regulation screw as a pressure regulating device. This tool is equipped with several safety devices, a compact design, and is reliable and suitable for use in household and industrial installations.

Type

    Italpump Gas Regulator type IR0
    Italpump Gas Regulator type IR1-2
    Italpump Gas Regulator type IR3-5
    Italpump Gas Regulator type IR5 32-100
    Italpump Gas Regulator type IRZ 

Fitur

   EC certifi ed according to EN 88-2
    In conformity with the 2009/142/EC Directive (Gas Directive)
    In conformity with the 94/9/EC Directive (ATEX Directive)
    In conformity with the 97/23/EC Directive (PED Directive)

Description

Italpump Solenoid Valves is a valve that is controlled by an AC or DC electric current through the coil. The principle of function of this solenoid valve is very simple and very safe. Equipped with adjustable flow regulator and slow opening kit.

Type

Solenoid Valve Italpump type IE
Solenoid Valve Italpump type IEL1-3-6
Solenoid Valve Italpump type IEL03
Solenoid Valve Italpump type IENA

Fitur

    EC certifi ed according to EN 161
    In conformity with the 2009/142/EC Directive (Gas Directive)
    In conformity with the 94/9/EC Directive (ATEX Directive)
    In conformity with the 2004/108/EC Directive (Electromagnetic Compatibility)
    In conformity with the 2006/95/EC Directive (Low Voltage)
    6 bar versions in conformity with the 97/23/EC Directive (PED Directive)

Description

Anello Gas Pressure Regulators is a tool for adjusting the gas outlet pressure suitable for the installation of automatic gas burner systems and for industrial distribution systems. It has a safety diaphragm that is incorporated to ensure that in the event of a breakdown of the operating diaphragm, no gas leakage is possible.

Type

    Gas Pressure Regulator Anello type FG1B
    Gas Pressure Regulator Anello type FS1B
    Gas Pressure Regulator Anello type ST4B

Fitur

    The gas governors are in accordance with UNI EN88-2 specification (2009/142/CE gas regulation).
    The governors are suitable to systems installation with automatic gas burners including mixed and combined systems and to in industrial distribution systems.

Description

Sparepart burner Anello Gas Filters serves to prevent the entry of dust or dirt particles carried by gas and air. These gas filters are produced with high quality so that they can be operationalized over a long period of time.

Type

Anello Gas filter 70600 Series

    Anello Gas filter type 70609 Rp 1/2"
    Anello Gas filter type 70608 Rp 3/4"

Anello Gas filter 70600/1B Series

    Anello Gas filter type 70611/1B Rp 1/2"
    Anello Gas filter type 70612/1B Rp 3/4"
    Anello Gas filter type 70602/1B Rp 1"
    Anello Gas filter type 70604/1B Rp 1"1/4
    Anello Gas filter type 70603/1B Rp 1"1/2
    Anello Gas filter type 70631/1B Rp 2"
    Anello Gas filter type 70603F/6B DN 40
    Anello Gas filter type 70631F/6B DN 50
    Anello Gas filter type 70610F/6B DN 65
    Anello Gas filter type 70620F/6B DN 80
    Anello Gas filter type 70640F/6B DN 100
    Anello Gas filter type 70650F/6B DN 125
    Anello Gas filter type 70660F/6B DN 150

Anello Gas filter 70600/6B Series 

    Anello Gas filter type 70611/6B Rp 1/2"
    Anello Gas filter type 70612/6B Rp 3/4"
    Anello Gas filter type 70602/6B Rp 1"
    Anello Gas filter type 70604/6B Rp 1"1/4
    Anello Gas filter type 70603/6B Rp 1"1/2
    Anello Gas filter type 70631/6B Rp 2" 

Anello Gas filter 70680 Series

    Anello Gas filter type 70684 Rp 1"
    Anello Gas filter type 70685 Rp 1.1/4"
    Anello Gas filter type 70686 Rp 1.1/2"
    Anello Gas filter type 70687 Rp 2"

Fitur

-

Description

Sparepart burner Distributor Anello Anti Vibration Joint - Anello Anti Vibration Joint is a connection tool that functions as a vibration damper in the gas fuel line. It is manufactured to standard-compliant specifications (DIN & ISO) and has been certified under the Pressure Equipment Directive (PED). We have stocks product of Anello Anti Vibration Joint with the following types

Type

Anello Anti Vibration Joint  type GA
Anello Anti Vibration Joint  type GAF

Fitur

-

Description

Sparepart burner Distributor Anello Solenoid Valves - Anello Solenoid Valves is a valve that is controlled by AC or DC electric current through the coil with manual reset. Equipped with IP 65 protection and suitable for gas & air.

Type

    Anello Gas Solenoid Valve type N.O. MSV12/6B
    Anello Gas Solenoid Valve type N.O.  MSV34/6B
    Anello Gas Solenoid Valve type N.O. MSV100/6B
    Anello Gas Solenoid Valve type N.O. MSV112/6B
    Anello Gas Solenoid Valve type N.O. MSV114/6B
    Anello Gas Solenoid Valve type N.O. MSV200/6B
    Anello Gas Solenoid Valve type N.O. MSV212/6B
    Anello Gas Solenoid Valve type N.O. MSV300/6B
    Anello Gas Solenoid Valve type N.O. MSV400/6B
    Anello Gas Solenoid Valve type N.O. MSV500/6B
    Anello Gas Solenoid Valve type N.O. MSV600/6B
    Anello Gas Solenoid Valve type N.O. MSV800/6B
    Anello Gas Solenoid Valve type N.O. MSV1200/6B

Fitur

-

Description

Sparepart burner pressure regulator permits optimal mixture formation in forced air burners and premix burners in combination with mechanical or electronic gas/air regulation units. This applies to modulating and multistage variable operating modes. We have stocks product of Gas Multi Block Dungs with the following types.

Type

Dungs GasMultiBloc MBC

    This MB GasMultiBloc MBC integrates a filter, servo pressure regulator, two class A valves and a pressure switch in one compact unit. They represent the newest and most modern series of Dungs gas blocks.
    The modular system provides individual solutions in gas safety and control systems
    MBC-65 and MBC-120 models are used for one-stage mode burners. In MBC-...-SE models the servo pressure regulator permits optimal mixture formation in forced air burners and premix burners in conjunction with mechanical or electronic integrated gas-air regulation units; it applies to modulating and multi-stage operating mode.
    The two valves are fast opening and fast closing, the dirt trap is different according to the type (see table below).
    Different pressure switch types mountable: GW A5, GW A2, NB A2, UB A2. Standard equipped with GW 150 A5.
    Reference value spring is installed permanently, no spring replacement possible for MBC-65 and MBC-120. Bigger models have different type of springs for different pressure ranges. They can also be equipped with versions for zero pressure and gas-air ratio control .
    Optional external pulse for MBC-1900 - 5000.
    High flow valves at low pressure difference.
    Simple mounting, compact, light-weight.
    MBC-...-SE can also be used to replace the old double solenoid gas valves DMV-SE and MBC-...-VEF replaces DMV-VEF.
    Suitable for gases of families 1, 2, 3 and other neutral gaseous media.

Dungs GasMultiBloc MB-DLE - Single Stage Operation

    This GasMultiBloc MB-DLE integrates a filter, pressure regulator, two class A valves, a bypass valve (B07) and pressure switches in one compact fitting.
    The modular system permits individual solutions by using external ignition gas tap in connection with separately controlled valves, by adding a valve proving system, min/max pressure switches, pressure limiters, partial volume setting by closing stroke limiter at valve V2 and regulator blocking for liquid gas applications.
    Maximum operating pressure is 360 mbar (200 mbar for MB-DLE 403), ambient temperature -15÷70ºC (only above 0 for LPG), degree of protection IP 54.
    The two valves are controlled in common or separated, depending on the model; both are fast closing. V1 is with fast-opening and V2 with slow-opening
    Main volume restrictor at valve V2.
    MB-DLE B07 series has an additional bypass valve with fast opening.
    Different pressure switch types mountable: GW A5, GW A2, NB A2, UB A2. Standard equipped with GW 150 A5.
    The pressure regulator has a setpoint spring permanently installed, no exchange possible. A vent line above roof is not required.
    MB-DLE 403-412 models have a fine mesh sieve, replacement only possible by dismounting the fitting. MB-DLE 415 and 420 have a pre-mount filter that can be changed without removing the valve.
    Simple mounting, compact, light-weight.
    Suitable for gases of families 1, 2, 3 and other neutral gaseous media.

Dungs GasMultiBloc MB-ZRDLE (MB-ZR) - Two Stage Operation

    This MB GasMultiBloc MB-ZRDLE integrates a filter, pressure regulator, two class A valves, a bypass valve (B07) and pressure switches in one compact fitting.
    The modular system permits individual solutions by using external ignition gas tap in connection with separately controlled valves, by adding a valve proving system, min/max pressure switches, pressure limiters, limit switch and closing stroke limiter at valve V2, regulator blocking for liquid gas applications.
    Maximum operating pressure is 360 mbar, ambient temperature -15÷70ºC (only above 0 for LPG), degree of protection IP 54.
    The two valves are controlled in common or separated, depending on the model; both are fast closing. V1 is with fast-opening and V2 with fast or slow-opening
    Main volume restrictor and partial volume restrictor at valve V2.
    MB-ZRDLE B07 series has an additional bypass valve with one stage and fast opening.
    Different pressure switch types mountable: GW A5, NB A2, UB A2. Standard equipped with GW 150 A5.
    The pressure regulator has a setpoint spring permanently installed, no exchange possible. A vent line above roof is not required.
    MB-ZRDLE 405-412 models have a fine mesh sieve, replacement only possible by dismounting the fitting. MB-ZRDLE 415 and 420 have a pre-mount filter that can be changed without removing the valve.
    Simple mounting, compact, light-weight.
    Suitable for gases of families 1, 2, 3 and other neutral gaseous media.

Dungs GasMultiBloc MB-VEF

    This GasMultiBloc MB-VEF integrates a filter, gas/air ratio controls, two class A valves and a pressure switch.
    The gas/air ratio control ensures optimal mixture formation in forced air burners and pre-mix burners; this applies to floating and two-step floating operations.
    Maximum operating pressure is 360 mbar, output pressure range 0.5÷100 mbar, ambient temperature -15÷70ºC.
    Ratio V = pburner/pblower, air 0.75:1 up to 3:1.
    Zero point adjustment N.
    Different pressure switch types mountable: GW A5, GW A2, NB A2, UB A2. Standard equipped with GW 150 A5.
    External pulse lines, pulse flange.
    The modular kit ensures individual solutions comprising valve proving system, min/max pressure switches and pressure limiters.
    Suitable for gases of families 1, 2, 3 and other neutral gaseous media.

Fitur

    Ease of installation
    Suitable for high pressure applications
    Longer service life
    Efficient regulation operation  
    We have following Items in our stock.
    Burner Management Systems Automatic Burner Controls
    Pressure regulators Pressure switches for gas and air
    Solenoid valves
    Double solenoid valves Multi Block.
    Gas Multi Block Multifunctional gas controls
    Valve proving systems Line leakage testers Laboratory
    System engineering Gas trains
    Ball valve Filters
    Motor butterfly valves & Actuators
    Accessories

Description

DUNGS DMV integrates two solenoid valves in one compact fitting. Double solenoid valves are used where two single valve were mounted previously. We have stocks product of Double Solenoid Valve Dungs with the following types.

Type

    Dungs Double Solenoid Valve DMV 5 -  
    Dungs Double Solenoid Valve DMV 11 eco -  
    Dungs Double Solenoid Valve DMV 12 -  
    Dungs Double Solenoid Valve DMV 525 -  
    Dungs Double Solenoid Valve DMV 602 -  
    Dungs Double Solenoid Valve DMV 604L NEMA 4x -  
    Dungs Double Solenoid Valve DMV 622 & POC -  
    Dungs Double Solenoid Valve DMV 624L NEMA 4 & POC -  
    Dungs Double Solenoid Valve DMV 704 NEMA 4 & POC -  
    Dungs Double Solenoid Valve DMV 704 NEMA 4 -  
    Dungs Double Solenoid Valve DMV 50050 -  
    Dungs Double Solenoid Valve DMV eco 6xx -  
    Dungs Double Solenoid Valve DMV ZR 602 -  
    Dungs Double Solenoid Valve DMV ZR 612 & POC -  
    Dungs Double Solenoid Valve DMV-D(LE) 11 -  
    Dungs Double Solenoid Valve DMV-D11 -  
    Dungs Double Solenoid Valve DMV-SE 507-525 11 -  
    Dungs Double Solenoid Valve DMV-VEF 507-525 -  
    Dungs Double Solenoid Valve Vent Line Adapter DMV 7xx -  
    Dungs Double Solenoid Valve DMV & Vent Line Adapter -  

Fitur

    Low power consumption
    Low weight
    Compact design
    High flow rates
    Max. operating pressure 500 mbar (50 kPa), 5000 mbar (5 bar, 500 kPa)
    Fast closing
    Fast opening
    Automatic shut-off valves as per DIN EN 161 Class A Group 2
    Two A valves in one housing
    Double seat valves
    Mountable closed position signal contact
    DC solenoid
    CSA Certified
    EU Gas Appliance Regulation EN161
    DUNGS is an ISO 9001 manufacturing facility

Description

Kromschroder Photocell Regulator tekanan tipe penyeimbang FRI/6 menggabungkan regulator tekanan dan filter gas 50 mikron dalam satu wadah. Berbagai kombinasi dimungkinkan menggunakan using FRI/6 dengan penutupan DMV terbanyak katup untuk sistem modular kompak. Regulator tekanan FRI/6 direkomendasikan untuk industri dan komersial aplikasi pemanas dan cocok untuk gas alam, propana, butana, udara dan gas inert. Cocok untuk hingga 0,1% oleh volume, H2 kering S Gas "kering" memiliki titik embun lebih rendah dari +15 °F dan kelembaban relatifnya kurang dari 60%.memiliki sensor yang disebut UV. Tugas sensor UV adalah mendeteksi sinar ultraviolet dari nyala api dan kemudian menghubungkannya ke kontrol burner. Sensor UV tidak akan merespon sinar matahari, lampu pijar, atau radiasi inframerah.

Type

Kromschroder Photocell type UVS 5
Kromschroder Photocell type UVS 10

Fitur

Virtually immune to interference due to its insensitivity to daylight, infrared radiation and incandescent bulbs
Maximum safety thanks to protection against discontinuity or short-circuit on the flame signal cable
Suits industrial needs due to robust design
Complies with the requirements of EN 298 in conjunction with Kromschröder automatic burner control units and burner control units

Description

Distributor Beru Special Ignition Electrodes - Bagian ini juga cocok untuk aplikasi khusus seperti pemantauan level dan suhu

Type

ZE special spark plugs with single electrodes
ZK special spark plugs with earth electrodes
ZK 18-12 special spark plugs with safety tubes

Fitur

- 

Description

Sparepart burner Distributor burner control - Burner Controls adalah kontrol burner berkualitas tinggi dan perangkat pemantauan otomatis. Seperti yang kita ketahui, Siemens adalah perusahaan besar dengan pengalaman bertahun-tahun. Kontrol burner Siemens adalah solusi sempurna untuk kebutuhan industri burner. Kami memiliki stok produk Siemens Burner Controls dengan tipe sebagai berikut.

Type

    Siemens Burner Control type LAL
    Siemens Burner Control type LDU
    Siemens Burner Control type LEC1
    Siemens Burner Control type LFE10
    Siemens Burner Control type LFL1
    Siemens Burner Control type LGB
    Siemens Burner Control type LME
    Siemens Burner Control type LME71
    Siemens Burner Control type LME73
    Siemens Burner Control type LME75-76
    Siemens Burner Control type LMO
    Siemens Burner Control type LMV5
    Siemens Burner Control type LMV36
    Siemens Burner Control type LMV37
    Siemens Burner Control type LOA
    Siemens Burner Control type LOK
    Siemens Temperature-Pressure Controller RWF5

Fitur

-

Description

Distributor flame sensor - Siemens flame sensor or photocells adalah perangkat detektor yang dirancang untuk dihubungkan ke kontrol burner dan untuk memantau nyala api, gas, dan minyak. Sensor api ini juga dilengkapi dengan sensor UV. Kami memiliki stok produk sensor api/fotosel Siemens dengan tipe sebagai berikut.

Type

    Siemens Flame Sensor QRA Series
    Siemens Flame Sensor QRB Series
    Siemens Flame Sensor QRB Series
    Siemens Flame Sensor QRI Series
    Siemens Flame Sensor RAR Series

Fitur

-

Description

Suntec Oil Pumps dirancang khusus untuk aplikasi pemanas industri yang menggunakan minyak ringan atau berat dengan kapasitas rendah, sedang dan tinggi. Pompa oli ini dirancang dengan respons yang sangat cepat. Kami memiliki stok produk Pompa Minyak Suntec dengan tipe sebagai berikut.

Type

Types low :

    Oil Pump Suntec A2L
    Oil Pump Suntec A-3000
    Oil Pump Suntec AE
    Oil Pump Suntec AL
    Oil Pump Suntec AM
    Oil Pump Suntec AS
    Oil Pump Suntec ATUV
    Oil Pump Suntec AUV
    Oil Pump Suntec OT2

Types Medium :

    Oil Pump Suntec AJ
    Oil Pump Suntec B-4000
    Oil Pump Suntec E1001
    Oil Pump Suntec E1069

Types High :

    Oil Pump Suntec T
    Oil Pump Suntec TA
    Oil Pump Suntec TAR
    Oil Pump Suntec TV

Fitur

-

Description

Distributor Oil Pump - Danfoss Oil Pump diproduksi dengan teknologi koil berlian-karbon yang memberikan ketangguhan, daya tahan, dan kekuatan yang luar biasa berkat kombinasi pelumasan berlian dan karbon. Dengan teknologi ini, masa pakai pompa oli ini 10 kali lebih lama bahkan dalam aplikasi kritis. Kami memiliki stok produk Pompa Oli Danfoss dengan tipe sebagai berikut.

Type

Danfoss Oil Pump BFP 10T/11T sizes 8 and 12

Fitur

    10 times longer lifetime in critical applications e.g. in heavy loaded conditions
    Equipped with extra durable Diamond Coil
    Double warranty...etc

Description

Sparepart burner Siemens Servo Motor adalah aktuator elektromotorik untuk digunakan dengan peredam udara dan katup kontrol pembakar minyak atau gas berkapasitas kecil hingga sedang. Kami memiliki stok produk Siemens Servo Motor dengan tipe sebagai berikut.

Type

    Siemens Servo Motor SQM 10.15562
    Siemens Servo Motor SQM 10.16502
    Siemens Servo Motor SQM 10.16562
    Siemens Servo Motor SQN 30.111 A 3500
    Siemens Servo Motor SQN 31. 151 A 2766
    Siemens Servo Motor SQN 90.220A2790
    Siemens Servo Motor SQN 90.570A2793
    Siemens Servo Motor SQN 91.140B2790
    Siemens Servo Motor SQN 91.140B2799

Fitur

    Impact-proof and heat-resistant plastic housing
    Screw terminals for the electrical connections
    Maintenance-free gear train, which can be disengaged...etc

Description

Kromschroder burner control IFS 110 IM is an automatic burner control unit suitable for the ignition and control of the combustion gases of all types of gas firing installations. This burner control is designed for high frequencies and is made of impact-resistant plastic material for maxKontrol burner Kromschroder IFS 110 IM adalah unit kontrol burner otomatis yang cocok untuk pengapian dan kontrol gas pembakaran dari semua jenis instalasi pembakaran gas. Kontrol burner ini dirancang untuk frekuensi tinggi dan terbuat dari bahan plastik tahan benturan untuk pengoperasian jangka panjang yang maksimal.imum long-term operation.

Type

Kromschroder Burner Control Automatic IFS 110 IM

Fitur

Flame control by means of flame rod or UV-detector
Flame simulation check before starting and after switching the burner off
Suitable for ignition and ionisation control with one electrode
Modern technique using semiconductors
High cycling frequency
Remote reset
External fault indication
FM approved
Kromschröder is a company certified to ISO 9001